Find the perfect trailer decking screws for your needs in 2023, with our extensive research and 80822 verified customer reviews. Get expert insights from real users to help you make an informed decision quickly and easily!
List Of Top Trailer Decking Screws 2023
- Length of Screw Does NOT Represent the Usable Length of Thread / Thickness of Wood - See Graphic
- Maximum Wood depth ~1-1/2" - Maximum Metal Thickness Screw Can Bore ~1/4" - Use T-30 Torx/Star Bit
- Dimensions: Head Width .461" - Total Length 2-3/4" - Shank Diameter .24" - Torx /Star Bit Not included
- Reference Installation Instructions Before Installing - NOT For Welded Seams or Tempered Metal
- Reamer Tek Screws are for Applications where Wood is Being Fastened to Mild Steel or Aluminum
- Floor board screws are specially designed for installing wood floors into truck trailers
- Six-Lobe Recess Flat Heads (Floorboard)
- Self Tapping Thread Cutting Screws - Measure length from the top of the head to the tip
- Black Phosphate and Oil Finish. The oil serves as a rust inhibitor and a lubricant
- The head design of Floorboard Screws provide a flush surface in countersunk holes. For this reason, they are perfect in floorboard fastening applications.
- Diameter/Pitch: 5/16-18" Length Under Head: 3"
- Threads: Type F Thread Cutting (Coarse), Full Thread
- Drive Size: T40 6 Lobe
- Material: Case Hardened Steel
- Finish: Plain & Oil
- Ideal fastener - these 1/4-20 x 2 1/2 inch star head trailer deck screws are the high-strength fasteners you need for a hassle-free job with no stripped threads
- Easy installation - just pre-drill a 7/32 pilot hole and secure the screw with a T30 star bit
- Durable construction - black oxide-coated for corrosion resistance and manufactured from quality steel for durability
- Convenient quantity - packed 50 screws per box
- SELF TAPPING TRAILER DECK SCREWS - Designed specifically for attaching wood floors into truck trailers, but they can be used in a number of different applications such as those involving fastening to heavy gauge sheet metal, aluminum, castings, cast iron, brass, and plastic.
- MATERIAL - Hardened Steel (RC 45 Minimum Case Hardness) | BLACK PHOSPHATE & OIL COATING - Provides corrosion Resistance
- For consistent performance, the material in which the threads are cut should have a lower hardness of at least 10-20 Rockwell points
- DRIVE - T-30 TORX DRIVE (6-LOBE)
- RECOMMENDED PLATE THICKNESS - .247 inches- .253 inches | RECOMMENDED HOLE SIZE - .228 inches (#1 Drill Bit Size)
- Type F Point
- 6-Lobe Drive
- T40 Drive Size
- Carbon Steel
- Type F Point
- 6-Lobe Drive
- T40 Drive Size
- Carbon Steel
- Type F Point
- 6-Lobe Drive
- T40 Drive Size
- Carbon Steel
- Type F Point
- 6-Lobe Drive
- T40 Drive Size
- Carbon Steel
- REAMER - Self Drilling Wood to Metal Screw with Wings
- TEK 4 DRILL POINT - gives screw a drill capacity of .110" - .375" through metal. Recommended Drill Speed is 1350 RPM
- DEEP CHIP CAVITY - allows screws to cut threads more effectively into metal.
- ATTACHES WOOD to METAL (3/4" - 2-1/4" Wood Thickness to .110" - .375" Metal Thickness)
- Zinc Plated
- Diameter: 1/4-20
- Length: 2
- Drive Type: 6-Lobe / Torx
- Head Type: Flat
- Finish: Plain
- Diameter/Pitch: 1/4-20" Length Under Head: 2-1/4"
- Threads: Type F Thread Cutting (Coarse), Full Thread
- Drive Size: T30 6 Lobe
- Material: Case Hardened Steel
- Finish: Plain & Oil
- Diameter: 1/4-20
- Length: 2-1/2
- Drive Type: 6-Lobe / Torx
- Head Type: Flat
- Finish: Plain
- Diameter: 5/16-18
- Length: 2
- Drive Type: 6-Lobe / Torx
- Head Type: Flat
- Finish: Plain
- Type F Point
- 6-Lobe Drive
- T40 Drive Size
- Carbon Steel
- SELF-DRILLING POINT: Together, coarse screw threads and a self-drilling point design eliminate the need for a pilot hole
- FLAT-HEAD STYLE: Sits flush with material
- GREEN CERAMIC COATING: 4-layer coating provides superior rust and corrosion protection
- STAR DRIVE STYLE: Also known as Torx, this drive is designed to reduce slippage and camout when tightening the screw
- FREE T25 STAR BIT: Free driver bit included in package to match screws and take the guesswork out of installation
- 15 Pieces Total
- Diameter/Pitch: 1/4"-20 | Length: 2-1/4"
- Wrench Size: T30 | Head Type: Star Drive
- Point Type: Type F - Thread Cutting | Grade: Case Hardened Steel
- Threading: Coarse Full
- Thread Diameter: 1/4-20
- Length: 3
- Drive Type: 6-Lobe / Torx
- Drive Size: T30
- Finish: Plain
At Fridakahlofans, we want to help you make the right trailer decking screws for your individual needs and have compiled our reviews with that goal in mind. If ours has been a useful resource on your journey of discovery, please show us some love by sharing it!